Ocala, FL · Epoxy Floor Coatings

Epoxy Flooring in Ocala, FL

One silo, every floor: garages, lanais, pool decks, workshops, and shops — all on ground prep and a written price.

Get a Free Estimate

Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.

Rather talk? Call (352) 555-0148.

Epoxy flooring, system by system

Epoxy flooring is a resin coat built on your concrete slab: a base coat for grip and build, a finish layer for the look, and a clear topcoat for wear and sun. The right system depends on where the floor sits and how hard it gets used — a garage, a lanai, and a work bay do not want the same build.

Our most common build is the hybrid most Florida pros trust: an epoxy base for bond and build, full flake spread wall to wall, and a polyaspartic clear top for sun and hot tires. Metallic floors are the showpiece end of the menu. Solid color is the clean, plain workhorse for shops and utility floors.

What does not change from system to system is the prep. Every floor gets diamond-ground, repaired, and tested for moisture, because in Marion County the slab — not the coat — is what decides how long a floor lasts. Our honest take: spend your money on prep and the topcoat, and the middle takes care of itself.

Pick a page below and read up on the system that fits your floor, or go straight to the cost guide for our rates in the open. Every page ends with the same calculator, and every estimate is a written price after an in-person look.

Why prep decides the floor

A coat can only hold what it can grip. Ocala slabs are troweled smooth at the pour, and many carry a curing seal on top of that. Roll a coat onto that surface and it sits on top like paint on glass — fine until a hot tire, a wet month, or a heavy load asks it to hold.

Grinding opens the slab up so the base coat keys into the concrete itself. It also tells the truth about the floor: cracks, soft spots, oil soaked in deep, and old coats all show up under the grinder, while there is still time to fix them.

  • Diamond grind on the whole slab, every job
  • Cracks chased, filled, and ground flush
  • Moisture test before coating, barrier primer when the reading calls for it
  • Old paint and failed coats ground all the way off

Floors we have coated

Finished full-flake garage floor in Ocala
The same Ocala garage floor before coating
BeforeAfter

Two-car garage, full-flake system

440 sq ft · Final price $3,400

The slab had two long cracks and dark stains where the tires sit. We ground the floor, filled the cracks, and ran a full-flake system with a polyaspartic topcoat.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Finished polyaspartic garage floor in Belleview
The same Belleview garage floor before coating
BeforeAfter

Two-car garage, polyaspartic system

440 sq ft · Final price $3,950

A thin paint coat from years back was lifting at the door line. We ground it all off and tested the slab for moisture. Then we laid a polyaspartic system that holds its color in the sun.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Finished garage floor in a new Marion Oaks home
The same new Marion Oaks garage slab before coating
BeforeAfter

One-car garage in a new build, full-flake system

240 sq ft · Final price $1,950

A brand-new slab, coated before the first oil drip ever hit it. We ground off the curing seal, checked the moisture, and ran a full-flake floor while the house was still empty.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.

Get a Free Estimate in Ocala

Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.

Rather talk? Call (352) 555-0148.

Questions we hear

What is the difference between epoxy and polyaspartic?

Epoxy builds thick, bonds deep, and cures slow. Polyaspartic cures in hours and holds its color in the sun. Most of our garage floors use both: epoxy at the base, polyaspartic on top. The guide on this site walks through it floor by floor.

How long does an epoxy floor last?

A well-prepped residential floor should give you 15 to 20 years of service. The slab prep and the topcoat decide most of that. Floors that fail young almost always failed at the prep, not the product.

Do you test for moisture?

Yes, on every job. Ground moisture pushing up through a Florida slab is the top cause of bubbling and peeling here. If the reading is high, a moisture barrier primer goes down before the system.

Can you coat a brand-new slab?

Yes, once the slab has cured and the curing seal is ground off. New-build garages are some of our best jobs — the floor gets coated before oil and stains ever reach it. We will confirm the timing at the estimate.

What colors can I pick from?

Flake blends run from light grays to deep charcoals and warm browns. You pick from real samples at the estimate, in your own light, not from a screen. Grays and browns are what most Ocala garages land on.

Do you coat floors outside the garage?

Yes — lanais, patios, pool decks, workshops, barns, and commercial floors all sit in this same menu. Outdoor floors get a sun-stable top and grip in the finish.

Estimate Calculator

Pick your floor and its size. The range updates as you go.

Add-ons your floor may need

Your planning range —

Every floor is different. Slab condition moves the final number more than size does.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Call (352) 555-0148 Estimate Calculator