Two-car garage, full-flake system
The slab had two long cracks and dark stains where the tires sit. We ground the floor, filled the cracks, and ran a full-flake system with a polyaspartic topcoat.
Metallic pigment worked in wet resin, so no two floors ever come out the same. The showpiece end of the menu.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (352) 555-0148.
A metallic epoxy floor starts as a clear or tinted resin coat. While it is wet, we move metallic pigment through it by hand. The pigment drifts and pools as it cures. The finished floor has depth — swirls, waves, and light that shifts as you walk across it. No two come out alike, and that is the point.
Metallic fits show garages, shops, salons, and living space. It fits any floor that is part of the room, not just under it. It is the most hands-on system we run. The look is made by the crew's work in the wet coat, in the minutes before it sets.
Honest framing, because this page should not promise what a slab cannot give: metallic shows more of the slab than flake does. It takes more days than a standard garage build. And the exact pattern cannot be ordered like a paint color. We will confirm fit at the in-person estimate. Your slab, your light, and the look you are after all get a say.
The same resin family shows up in epoxy countertops, which folks ask about often. If a counter is part of your plan, raise it at the estimate and we will talk through whether it fits the job.
Plan on a multi-day build: grind and repair, a tinted base, the metallic coat worked by hand, then a clear top for wear. Samples help with color family. But the floor itself is the final sample. Movement and light on a full slab never match a board in full.
Care is the same as any coated floor: sweep grit, mop with a mild cleaner, and keep harsh acids off it. A metallic floor in a working garage will show use, like any gloss floor. In a show space or living area, it holds its look for years.
The slab had two long cracks and dark stains where the tires sit. We ground the floor, filled the cracks, and ran a full-flake system with a polyaspartic topcoat.
A thin paint coat from years back was lifting at the door line. We ground it all off and tested the slab for moisture. Then we laid a polyaspartic system that holds its color in the sun.
A brand-new slab, coated before the first oil drip ever hit it. We ground off the curing seal, checked the moisture, and ran a full-flake floor while the house was still empty.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (352) 555-0148.
You pick the color family and the feel — bold or soft, high contrast or low. The exact movement comes from the resin as it cures, and no crew can promise a photo match. We set that expectation up front, in the open.
Longer than a standard garage build — plan on a multi-day job with cure time between coats. Your schedule is confirmed in writing at the estimate.
It can be, with eyes open: a gloss metallic floor shows scratches and tire marks more than flake does. For a hard-used work garage, we usually steer folks to full flake. For a show garage, metallic is the pick.
Metallic is priced per job after the in-person look, not off the calculator — the labor and the slab drive it. The estimate is free, and the price is written before work starts.
Pick your floor and its size. The range updates as you go.
Add-ons your floor may need
Every floor is different. Slab condition moves the final number more than size does.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.